Aluminium Round Pipe Aluminium Pipe Wholesale - TXD Steel

1. Carbon steel ship plateFeatures: low cost, good process performance, suitable for general ship structure.Q235B, Q345C (corresponding to classification society grades such as CCS-A, CCS-B).ABS-A, LR-A (in compliance with classification society standards such as ABS, LR).Application: main hull structure, non-critical parts (such as cargo holds, decks).2. Low alloy steel ship plateFeatures: adding alloy elements such as manganese, silicon, vanadium, high strength and good corrosion resistance.Q345D, Q390E (corresponding to CCS-D, CCS-E grade high-strength ship plates).ABS-H32, DNV-GL-A36 (high-strength ship plates, yield strength 315-355MPa).Application: Key parts of large ships (such as high-strength areas at the bow and stern), offshore vessels.

Stainless steel ship plates: Excellent corrosion resistance, used for chemical tankers, food transport ships, etc. (such as 316L stainless steel).Aluminum alloy ship plates: Light weight, good corrosion resistance, suitable for high-speed boats and yachts (such as 5083 aluminum alloy).Composite ship plates: Glass fiber reinforced plastic (GRP), etc., used for small ships or special demand scenarios.

Our Plate have different certificate , can meet major international classification societies:ABS (American Bureau of Shipping): formulates ship plate material specifications, such as ABS "Steel Hull Construction".LR (Lloyd's Register of Shipping): tests and certifies the mechanical properties and chemical composition of ship plates.DNV-GL (Det Norske Veritas): issues ship plate material certification certificates (such as MED certification for ship equipment).CCS (China Classification Society): The main certification body for domestic shipbuilding, ship plates must comply with the "Steel Seagoing Ship Classification Rules".

1. Mechanical propertiesStrength: It needs to have high tensile strength and yield strength to withstand the water pressure, wind and wave impact and self-load of the ship during navigation. For example, the yield strength of common ship plates is usually above 235MPa (such as Q235B).Toughness: It still maintains good impact toughness in low temperature environment to avoid the hull structure from cracking due to low temperature (such as the ABS specification requires that the impact energy of the ship plate at -20℃ meets the standard).Plasticity: It has a certain elongation to ensure that the hull is not easy to break when deformed by external forces. Generally, the elongation must reach more than 20%.2. Process performanceWelding performance: The ship plate needs to be easy to weld, and the mechanical properties of the heat-affected zone after welding do not decrease significantly to avoid weld cracking (such as the carbon equivalent is controlled below 0.4% to ensure weldability).Forming performance: It can be formed by cold bending, hot processing and other methods to meet the processing requirements of complex hull structures (such as the bending angle and bending center diameter in the cold bending test must meet the standard).3. Corrosion resistanceLong-term contact with corrosive media such as seawater and humid air requires good seawater corrosion resistance. Some ship plates will improve corrosion resistance by adding alloy elements (such as copper and nickel) or surface treatment.4. High and low temperature resistanceShip plates in high temperature areas such as engine rooms need to be resistant to high temperatures, while ship plates for polar routes need to be resistant to low temperatures (for example, nickel alloy ship plates can withstand temperatures below -100°C).

About our ship plates:1. Our thickness and specificationsWe can recommend different thicknesses according to different parts of the ship plates. The thickness of the hull shell is 6-50mm, and the thickness of the bottom plate of a large tanker can reach more than 30mm.The specifications must meet the shipbuilding process requirements (such as the width is usually 1.5-3m and the length can reach 12m).2. Our surface treatmentThe ship plates need to be derusted (such as Sa2.5 grade sandblasting derusting) and painted (primer, intermediate paint, topcoat) to prevent seawater corrosion. The coating thickness is usually 200-300μm.3. Weight and costUnder the trend of lightweight design, high-strength ship plates are preferred to reduce the amount of steel (such as using Q460E instead of Q345D can reduce weight by 20%).4. Our ship plates have excellent environmental protection and sustainabilityWe meet the EU's "Ship Energy Efficiency Design Index (EEDI)" requirements for low-carbon ship plate materials, and some ship plates use recycled steel (such as scrap steel recycling and smelting).The coating must meet environmental standards (such as low VOC paint to avoid polluting the ocean).

Pre-Sale service 1.Sample: Free sample can be provided with delivery charge afforded by you. 2.Production: We have own factory for machinery processing. Any shape can be customized. 3.Customization: Your logo can be stamped on products for free. The packing can be also design for your demand. Special material and size can be customized according to your quantity. 4. Transportation: Main gent of MSK/APL/MSK/SPL/COSCO/CMA etc. Best shipping service and charge. Bulk shipment,container shipment advantage. During production 1. Quality control: Material inspection, trial production, finished production testing and support Ly's, BV, TUV, ASB, SGS third party test. 2. Production procedures update every 2days. After-sales service 3 years warranty.