Good Price Non Alloy Hot Rolled Q235 Ss400 Q345 St52 S235 St37 Black Iron Sheet S235jr S355jr SAE1006 SAE1008 ASTM A36 Mild Carbon Steel Plate Manufacturer

Hot rolling is relative to cold rolling, which is rolling below the recrystallization temperature, and hot rolling is rolling above the recrystallization temperature. To put it simply, a billet is heated and rolled several times, then trimmed and straightened into a steel plate, which is called hot rolling. It can significantly reduce energy consumption and cost. During hot rolling, the metal has high plasticity and low deformation resistance, which greatly reduces the energy consumption of metal deformation. Hot rolling can improve the processing performance of metals and alloys, that is, the coarse grains in the as-cast state are broken, the cracks are significantly healed, the casting defects are reduced or eliminated, the as-cast structure is transformed into a deformed structure, and the processing performance of the alloy is improved.

What is the use of hot rolled plate?
Hot rolled steel is used widely in agriculture equipment because of its high strength level and formability. The formability of hot rolled P&O can be simple bends to complex draws depending on the steel grade. Harvesters, tractors, and other farm machinery all require the strength that hot rolled offers.

What is the difference between hot rolled and cold rolled plates?
Hot rolled steel comes with a scaly surface, slightly rounded edges and corners and the surface is non-oily. Cold rolled steel has an oily or greasy finish, very smooth surface, and very sharp edges.

What are 3 advantages to hot rolled steel?
In general, hot rolling has better mechanical properties than cold rolling. The hot rolled steel has improved tensile strength, yield strength, ductility and toughness. In addition, it is important that heat treatment eliminates residual stresses.

Hot-rolled coils are made from slabs, which are heated and then rolled into strips by rough rolling mills and finishing rolling mills.
The high-temperature steel strip coming out of the finishing mill is cooled to the set temperature by laminar flow and wound into a coil by a coiler.
Finishing lines for steel plate, flat coil and slitting strip products (leveling, straightening, cross-cutting or slitting, inspection, weighing, packing and marking, etc.).

1.Packing :Standard Seaworthy Package
2.Shipping port: Tianjin/Shanghai/Qingdao port
3.Shipment:
a. Length: ≤6m, loaded in 20GP Container.
b. Length: ≤12m, loaded in 40GP Container.
Remark: Size of 20GP Container (inside :5898*2352*2393mm)
Size of 40GP Container (inside:12032*2352*2393mm)
Size of 40HQ Container (inside:12032*2352*2698mm)
4.Delivery time: Within 7-15 days, depending on the situation

    Hot-rolled plate is the raw material for almost all steel products, such as cold-rolled , galvanized , pre-painted , angle steel, H Beam, flat steel, steel pipe, etc.And it widly used in color scroll raw material,building base material,boiler and the base material of the profile.It can be divided into ordinary carbon plate, excellent carbon plate, low alloy plate, ship plate, bridge plate, boiler plate, container plate, etc. Hard-rolled coils: Continuous rolling of hot-rolled pickled coils at room temperature.
    Hot rolled steel plate products include steel strip or coil and steel plate cut from it. The steel strip or coil can be divided into straight roll and finishing roll (sub-roll, flat roll and slitting roll).

Hot-rolled steel products are widely used in manufacturing industries such as ships, automobiles, bridges, construction, machinery, and pressure vessels due to their excellent properties such as high strength, high toughness, easy processing, and excellent weldability. 
Therefore, there is a huge demand for HR coil and sheet in the market.

1. It is suitable for general structural steel and engineering HR steel plate and steel strip, and can be used for welded pipes, cold-rolled materials, bicycle parts, and important welding, riveting, and bolting components.
2. Used for cold rolling and deep drawing products.
3. Making stamping and structural parts of automobiles, tractors, engineering hoisting machinery, and small light industrial civil machinery.
4. Make containers and exposed metal structures.
5. Welded pipe and steel structure.
6. Pipelines for transporting oil and gas.
7. Automobile girders and beams.
8. Special steel belt for automobile wheels.
9. Structural anti-skid plates, stairs, ladder pedals, etc.

Jinan Zunkai Materials Co., Ltd founded in 2016 and we located in Shandong Province.  Our company has five departments in Shandong province and we have more than 200 employees.  Our main products include hot rolled coils, cold-rolled coils, GI, PPGI, AFP 55% Al galvalume coil, we also export structural beams, steel pipe and stainless steel etc. Our company's annual turnover is about 50 million US dollars, we also entered into strategic partnership with Bao steel, Laiwu steel, Rizhao steel, Anfeng steel, HBIS etc.
 

Our partners

Pre-sale service:
1.Sample can be offered with courier fee by buyer's side.
2.We have full stock,and can deliver within short time.Many styles for your choices.
3. Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you
4. All of our products are produce by our professional workman and we have our high-work-effect foreign trade team, you can totally believe our service.
5. We have 8 year experience of manufacture and sell steel, we cherish every order from our honor.
 
After sale Services:
1. We will count cheapest shipping cost and make invoice to you at once.
2. Check quality again, then send out to you at 1-2 working day after your payment,
3. Email you the tracking no, and help to chase the products until it arrive you.
4.We are very glad that customer give us some suggestion for price and products.
5.If any question,please contact me in your free time.

FAQ
Q1: what is your terms of payment?
A:  30% T/T as the upfront deposit, 70% before delivery. We will show you the photos of products and package before you pay the balance.

Q2: what is the terms of delivery?
A: EXW, FOB, CIF, CFR, DDU

Q3: What is the terms of packing?
A: generally, we pack our goods in bundles or coils with rods or belts, we could also pack the goods as the customers' requirement.

Q4: What is your delivery time?
A: For stocks, we could transport the goods to loading port within 7 days after we received your deposit.
For production period, it usually takes about 15 days-30 days after receiving the deposit.

Q5: Could you produce according to the samples?
A : Yes, we could customer-made by your samples or technique drawings, we could build the mold and fixtures.

Q6: Could you provide the compliment samples?
A: yes, we could provide the free samples on conditons it is available in stocks, however, the the transportation fee is borne by buyer.

Q7: How could you guarantee your products?
A: Each piece of products is manufactured by certified workshops, inspected by SORUN piece by piece according to national QA/QC standard. We also could issue the warranty to customer to guarantee the quality.

Q8: How do we trust your company?
A: We specialise in steel business for 14 years, headquarter locates in Jinan, Shandong province, you are welcome to investigate in any ways, by all means, you could place an order in make in China with trade assurance which could secure your payment.